Rock brittleness directly affects reservoir fracturing and its evaluation is essential for establishing fracturing conditions prior to reservoir reforming. Dynamic and static brittleness data were collected from siltstones of the Qingshankou Formation in Songliao Basin. The brittle–plastic transition was investigated based on the stress–strain relation. The results suggest that the brittleness indices calculated by static elastic parameters are negatively correlated with the stress drop coefficient and the brittleness index B2, defined as the average of the normalized Young’s modulus and Poisson’s ratio, is strongly correlated with the stress drop. The brittleness index B2, Young’s modulus, and Poisson’s ratio correlate with the brittle minerals content; that is, quartz, carbonates, and pyrite. We also investigated the correlation between pore fluid and porosity and dynamic brittle characteristic based on index B2. Pore fluid increases the plasticity of rock and reduces brittleness; moreover, with increasing porosity, rock brittleness decreases. The gas-saturated siltstone brittleness index is higher than that in oil- or water-saturated siltstone; the difference in the brittleness indices of oil- and water-saturated siltstone is very small. By comparing the rock mechanics and ultrasonic experiments, we find that the brittleness index obtained from the rock mechanics experiments is smaller than that obtained from the ultrasonic experiments; nevertheless, both decrease with increasing porosity as well as their differences. Ultrasonic waves propagate through the rock specimens without affecting them, whereas rock mechanics experiments are destructive and induce microcracking and porosity increases; consequently, the brittleness of low-porosity rocks is affected by the formation of internal microcrack systems. 相似文献
Ocean Science Journal - A carbonic anhydrase VII gene, encoding 277 amino acids, was identified in the intestinal tissue of pufferfish (Takifugu rubripes). The translated protein with an 833-bp... 相似文献
Ocean Science Journal - Investigations on marine N2 fixation have gained momentum since 1960s with eventual establishments of relevant methodologies to identify species involved and quantify the... 相似文献
Based on the three-dimensional digital image correlation (3D-DIC) technique, the stereovision system has been applied to the improved triaxial apparatus to obtain 3D full-field deformation of the specimen during triaxial testing. Through the calibration process, the 3D-DIC technique can obtain the accurate specimen’s spatial displacement deformation. Meanwhile, a subpixel edge detection algorithm has been combined with 3D-DIC technique to calculate the radial strain and the volume strain of the specimen directly. Furthermore, a series of consolidated drained and undrained triaxial tests were carried out on Hainan (China) sand specimens and measured by the conventional and the image measurement methods. Compared to the results measured by the conventional method, the image measurement technique can obtain the more experimental data, such as the 3D displacement field of the whole specimen, the local strain distribution, and so on. The measurement results also show the conventional method would be disturbed by the end constraints in triaxial tests so that the strength of the soil would be overestimated. Meanwhile, the middle of the specimen would be selected to calculate the stress–strain relationship without the influence of the end constraints in the proposed method. Based on the image measurement results, the proposed method has the potential to be used in geotechnical tests for exploring the soil’s progressive failure behaviors, inhomogeneous deformation and mechanical characteristics.
Morphogenesis of a population of the marine euplotid ciliate, Uronychia binucleata, which was found in Yellow Sea coastal waters next to a sewage outfall at a beach near Zhanqiao Pier, Qingdao, China, was investigated using protargol staining. The main pattern of morphogenesis is typical for the genus and can be summarized as follows: 1) the oral primordium in both proter and opisthe develops de novo in a subcortical pouch. In each daughter cell, the developing adoral zone of membranelles divides into two parts. The new membranelles formed in the proter's oral primordium will replace the leftmost five parental ones; six parental membranelles are retained by the proter; 2) the undulating membranes anlage is formed and develops independently from the oral primordium within the same subcortical pouch; 3) five primary front oventral-transverse cirral anlagen appear de novo on the cell surface; 4) the marginal cirral anlagen are formed de novo; 5) the leftmost frontal cirrus develops de novo on the cell surface; 6) two caudal cirri are formed at the posterior end of the rightmost anlage while the second primordium from the right gives rise to the third caudal cirrus. In contrast to its congeners, the anlage of the leftmost frontal cirrus is formed to the right of the undulating membranes anlage and before the formation of the latter. 相似文献
To address challenges in stochastic seismic analysis of nonlinear structures, this paper further develops a recently proposed Gaussian mixture–based equivalent linearization method (GM‐ELM). The GM‐ELM uses a Gaussian mixture distribution model to approximate the probabilistic distribution of a nonlinear system response. Using properties of the Gaussian mixture model, GM‐ELM can decompose the non‐Gaussian response of a nonlinear system into multiple Gaussian responses of linear single–degree of freedom oscillators. With the set of the equivalent linear systems identified by GM‐ELM, response statistics as crossing rate and first‐passage probability can be computed conveniently using theories of linear random vibration analysis. However, the original version of GM‐ELM may lead to an inaccurate estimate because of the heuristic parameters of the linear system introduced to supplement insufficient information. To overcome this limitation and define unique equivalent linear systems, this paper proposes a further developed version of GM‐ELM, which uses a mixture of bivariate Gaussian densities instead of univariate models. Moreover, to facilitate the use of elastic response spectra for estimating the mean peak responses of a nonlinear structure, a new response spectrum combination rule is proposed for GM‐ELM. Two numerical examples of hysteretic structural systems are presented in this paper to illustrate the application of the bivariate GM‐ELM to nonlinear stochastic seismic analysis. The analysis results obtained by the bivariate GM‐ELM are compared with those obtained by the univariate GM‐ELM, the conventional equivalent linearization method, the tail equivalent linearization method, and Monte Carlo simulation. The supporting source code and data are available for download at https://github.com/yisangri/GitHub‐bGM‐ELM‐code.git 相似文献
Afyonkarahisar is a very important geothermal province of western Anatolia and has low and medium enthalpy geothermal areas. This study has been carried out for the preparation of distribution maps of soil gases (radon and carbon dioxide) and shallow soil temperature and the exploration of permeable tectonic regions associated with geothermal systems and reveal the origins of radon and carbon dioxide gases. The western district of the study area is characterized by the high radon concentration (168.30 kBq/m3), carbon dioxide ratio (0.30%), and soil temperature (21.0 °C) values. Fethibey and Demirçevre faults, which allow the circulation of geothermal fluids, have been detected in the distribution maps of radon, carbon dioxide, and shallow depth temperature and the directions of the curves in these maps correspond to the strikes of Demirçevre faults. The effect of the fault plays an important role in the change of carbon dioxide concentration along the W-E directional geological section prepared to determine the change of soil gas and shallow depth temperature values depending on lithological differences, fault existence, and geothermal reservoir depth. On the other hand, it was determined that Rn222 concentration and soil temperature changed as a function of geothermal reservoir depth or lithological difference. Tuffs in Köprülü volcano-sedimentary units are the main source of radon due to their higher uranium contents. Besides, the carbon dioxide in Ömer–Gecek soils has geothermal origin because of the highest carbon dioxide content (99.3%) in non-condense gas. The similarities in patterns of soil temperature, radon, and carbon dioxide indicate that the variation in soil temperatures is related to radon and carbon dioxide emissions. It is concluded that soil gas and temperature measurements can be used to determine the active faults in the initial stage of geothermal exploration successfully. 相似文献
In the present study, laboratory experiments were conducted to validate the applicability of a numerical model based on one-dimensional nonlinear long-wave equations. The model includes drag and inertia resistance of trees to tsunami flow and porosity between trees and a simplified forest in a wave channel. It was confirmed that the water surface elevation and flow velocity by the numerical simulations agree well with the experimental results for various forest conditions of width and tree density. Further, the numerical model was applied to prototype conditions of a coastal forest of Pandanus odoratissimus to investigate the effects of forest conditions (width and tree density) and incident tsunami conditions (period and height) on run-up height and potential tsunami force. The modeling results were represented in curve-fit equations with the aim of providing simplified formulae for designing coastal forest against tsunamis. The run-up height and potential tsunami forces calculated by the curve-fit formulae and the numerical model agreed within ± 10% error. 相似文献